|
 |
Steel and Metal Building Roofs | Panel Types
Roof Panel Types for Metal and Steel Buildings
Whether you need a screw-down roof or a standing seam roof, Heritage can custom engineer the perfect roof for your project. Below is a brief description of our roof panel offerings.
 |
PBR Roof Panels
The PBR panel is commonly used for a wide variety of architectural, agricultural, commercial and industrial applications. PBR is a structural panel and an exposed fastener panel that can be used for both roof and wall applications. The minimum roof slope for PBR is ½:12
- Coverage Width – 36"
- Rib Spacing – 12" on center
- Coverage Width – 36"
- Rib Height – 1-1/4"
- Minimum Slope – ½:12
- Panel Attachment – Exposed Fastening System
- Gauge – 26 (Standard); 29, 24, 22 (Optional)
- Finishes – Smooth (standard); Embossed (optional)
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300
|
 |
Double-Lok® Panels
The Double-Lok® roof panel is a mechanically field-seamed, trapezoidal leg standing seam roof system. Double-Lok® panels are available in 12-inch, 18-inch and 24-inch widths. Double-Lok® requires a minimum slope of ¼:12. Double-Lok® panels are ideal for industrial, commercial and architectural applications.
- Coverage Width – 12", 18", 24"
- Minimum Slope – ¼:12
- Panel Attachment – Concealed Fastening System; Low, High, and Sliding
- Rib Height – 3"
- Gauge – 22 and 24
- Finishes – Smooth (standard); Embossed (optional)
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
 |
Ultra-Dek® Panels
The Ultra-Dek® roof panel is a snap-together, trapezoidal leg standing seam roof system. Ultra-Dek® panels are available in 12-inch, 18-inch and 24-inch widths. Ultra-Dek® requires a minimum slope of ¼:12 and is ideal for industrial, commercial and architectural applications. Ultra-Dek® can be erected on various types of construction.
- Coverage Width – 12", 18", 24"
- Minimum Slope – ¼:12
- Panel Attachment – Concealed Fastening System; Low, High, Fixed and Sliding
- Rib Height – 3"
- Gauge – 24 (standard); 22, 26 (optional)
- Finishes – Smooth (standard); Embossed (optional)
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
 |
BattenLokHS® Panels
BattenLok® HS is a mechanically field-seamed, high strength structural standing seam roof system. The BattenLok® HS panels have a 2" tall vertical seam and are available in both 12-inch and 16-inch widths. BattenLok® HS can be installed directly over purlins or bar joists and is capable of transitioning from roof to fascia. BattenLok® HS does not require a solid substructure for support.
- Coverage Width – 12", 16"
- Minimum Slope – ½:12
- Panel Attachment – Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
- Rib Height – 2"
- Gauges – 24 (standard); 22 (optional)
- Finishes – smooth striated (standard); embossed striated and smooth, embossed striated with pencil ribs (optional)
- Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
|
|
|
|
|
|
